Magnetic Catches on Selby Furniture Hardware Co., Inc.

Shelf Hardware and
Accessories Lighting Fixtures Authentic Brass
Reproduction Hardware Cabinet Assembly
Fittings Wardrobe and Cabinet
Pullouts Casters, Glides and
Floor Guides Table Hardware Drawers, Drawer Slides
and Knobs Panel and Grille
Retainers Hinges Television Swivels and
Accessories Stays and Lid Supports Catches Locks and
Accessories Selby Sleep Systems

		\| Shipping \| Tax \| Terms

Request for Quote	0 Items


All Categories > Catches > Magnetic Catches


	Magnetic Catches
	Click on a Product to view details.


		Super-Strong "Twin" (26 lb. Rating) Permanent ferrite magnets with guaranteed square-fit pole pieces to ensure maximum contact and pull. 9/16" high, impact resistant molded polyurethane in brown or white. Supplied with one long strike or two small strike plates. Length: 2-15/16" Depth: 3/4" Height: 9/16" Base Thickness: 3/16" Hole c/c: 2-1/2" (64 mm).




		Thin-Man Magnet (9 lb. Pull) Permanent 9 lb. magnet with polished pole-contacts. Only 3/8" thick but strong enough to hold two doors. Black, Brown or white polyethylene case with nickelled or bronze steel strike Length: 1-31/32", Depth: 3/8", Height: 9/16", Base Thickness: 5/32", Hole c/c: 1-9/16", Oval strike plate 1-5/16" long x 1/2" high Optional: Rectangle strike plate 1-3/16" long by 7/8" high.




		Long John "Twin" Magnet (18 lb. Rating) Ideal for catching double doors with one magnet. Two 9 lb. magnets are set 7/8" apart with separate strike plates. Poles are floating for maximum contact. White or brown polyethylene. 7/8" separation between magnets. Length: 3-13/16", Depth: 3/4", Height: 9/16", Base Thickness: 5/32", Hole c/c: 3-7/16".




		Adjustable Brass-Clad Magnet (12 lb. Pull) Permanent Alnico magnet mounted on a screw base and encased in a brass sleeve. Insert by pressure into a hole 14 mm diameter x 22 mm deep. Magnet adjusts in-and-out 7 mm. For use on industrial and electronic equipment. Length: 7/8", Body Diameter: 9/16", Face Diameter: 5/8", Adjusts: 9/32". Supplied with round screw on strike plate.




		Drill-and-Drive Cylinder Magnets (4) Nylon-housed permanent magnets to drive into holes in wood. Maximum pulling power in minimum space. Screw-on strike standard. Drive-in strike optional. Pole-pieces ground and rust protected for maximum efficiency and life. Resistance to solvents and detergents.




		Face-Mounting Magnet Permanent Alnico non-swivel magnet for frontal mounting with right-angle adjustable strike. 13 lb. pull, light brown nylon. 3/4" wide x 1-15/16" long with holes 1-1/2" (38 mm) apart. Strike is 3/4" x 3/4" x 1-1/8" long with 3/8" adjustment slots on 7/8" (22 mm) centers, stat. bronze finish on steel.




		Economy Magnet One of the most widely used magnets. Dark brown nylon, with 9 lb. pull swivel magnet, 1/8" above ground level. 1/2" high x 1-1/6" deep x 2-1/16" long Adjustment slots 1/2" long on 1-5/8" (41 mm) centers Standard rectangular strike 7/8" high x 1-3/16" wide, stat. bronze




		Extra-High Double Magnet Two 9 lb. pull swivel magnets are raised 3/8" above ground level to accommodate gaps between door and frame and make location of strike easier. Adjustment slots are on 32 mm multiples (64 mm apart) and are oversize (1/2" long). *White, Brown or Black Nylon. May be used on two separate doors or as one 18 lb. magnet with a long strike on heavy doors. 2-3/4" long x 13/16" deep x 11/16" high* Standard strikes: 7/8" high x 1-3/16" wide, Stat. bronze OPTIONAL: Long double strike 2-1/2" long




		Extra-High Single Magnet Swivel magnet, 9 lb. pull, Raised 3/8" above ground. 1/2" long slots 32 mm. apart. *Almond, Brown or Black Nylon* 1-5/8" long x 13/16" deep x 9/16" high x 11/16" high Strike: 7/8" high x 1-3/16" wide, Stat. Bronze or Nickel finish




		High-Rise Single Magnets (2) Space-efficient high rise magnets raised 5/16" above ground. Permanent swivel magnets. Brown or white nylon 1-13/16" long x 21/32" high x 5/8" deep. Adjustment slots: 1-1/2" apart x 1/4" long Strike: 7/8" high x 1-3/16" wide. Nickel or Stat. Bronze strikes available.




		Strong Double Magnetic Catch Separate twin 9# magnets may be used individually for two separate doors with individual strikes (illustrated) or on one large door with single strike available on request. Slotted Screw holes for ±2 mm adjustment. Brown or White Nylon




		Industry-Standard Compact Size - Magnets (2) Economically-priced most popular magnet. Slotted holes for ±2.5 mm. Front-to-back adjustment. White nylon with rectangular zinc-plated strike or Brown or Black with bronzed or nickel strike.




		High-Rise 10# Magnet 7/32" extra thick base compensates for excessive gap on inset doors. Oversize slotted holes adjust ±3 mm. Brown, Black or White nylon with oval strikes.




		Triple Fixed Magnet (30# Pull) Heavy-duty riveted construction for special application where extra-strong pull is required. May be used with 2 single strikes and one large strike. Steel, brass plated.




		Drive-In Adjustable Alnico Magnet Central magnet screws in-and-out as needed. Press-fits into 3/8" hole. Brown or white nylon with nail-on strike.




		32 mm Drive-In Adjustable Alnico Magnet Two 5 mm diameter dowels spaced 32mm apart for application in in-line hole systems with set back from front edge of 37 mm. Incorporated screw adjusts 1/4" without tools. 13# permanent Alnico magnet in White or Brown nylon. Nail-on strike.